LED transparent screen water treatment method and measures
LED transparent screen water treatment method and measures
Glass curtain wall LED transparent display screen
First of all, when the LED transparent screen body is found to be in water, it should be handled urgently, and the power should be cut off immediately. Do not delay the time. Otherwise, the phenomenon of continuous dead light may occur, which may cause damage to the screen circuit. Secondly, the organizer uses a fan or other equipment to blow dry the LED transparent screen body.
After knowing that the display panel in the screen is dry, in order to be safe, it is necessary to illuminate the screen body. The steps are as follows:
The brightness (all white) was adjusted to 10%, and the power was aged for 8 hours.
The brightness (all white) was adjusted to 30%, and the power was aged for 8 hours.
The brightness (all white) was adjusted to 60%, and the power was aged for 8 hours.
The brightness (all white) was adjusted to 80%, and the power was aged for 8 hours.
The brightness (all white) was adjusted to 100%, and the power was aged for 8 hours.
After completing the above steps, the LED transparent screen body will basically return to normal. If the above steps can not make the LED transparent display display normally, please contact the LED transparent screen manufacturer maintenance personnel for processing.